Wednesday, September 24, 2008
Final Project A11
Your final project presentation is just a few weeks away from now. You have to make sure everybody in your group is doing what they are supposed to do. Avoid last minute preparation please. Perhaps, you can start planning your presentation from now. So, how much have you done so far? Care to share?
Subscribe to:
Post Comments (Atom)
33 comments:
Hai, how are you guys?
We just have one week to prepare the report. With other assignments around, and all the assignments are due to this week.Let's do it.My group presenting laptop acer 4920. any information about the laptop, is welcome. Let's share and gain the knowledge. All the best to other group such as handphone and Bujr dubai and others. Let's rock thhe presentation.
Hello! Selamat Hari Raya anyway,i just woke up because last night i slept at 2am.. i was in cafe until 1.30am doing my product introduction..i finish it last minute because my group members suggest to change printer brand.. anyway, I'm glad we finish it and manage to hand up.. Although we still got lots of assignments, coming quizzes and also test2, we'll try our best to give out of best of our projects.. And for who have any good idea on doing pamphlet, hopefully u guys willing to share with us, thank you!
teacher....
i try do my best on this project..
I hope u will like what i had done...
our group is doing the mixer.at first we suggested to do backhole but because there is less information about it.so...
we change it to this product in the last minute.
eh...about 11 to 12pm.
then we have to decided the brand and look for the information of our product.
i finish main part report about 2:30am in the morning and i feel sleepy...
but lastly we finish our report too and hopefully yuo guys who have information can share to our group...kindly welcome(^_^)
Finally it's over. i mean the product presentation. i feel so relief... i hope my group and myself did well and able to present the laptop quite well. Thanks to Ms.Ezi and my fellow friends for helping my group.
I'm so everything had over. Nothing to be worry anymore. Our group had presented Canon Pixma iP1000. Everything's went through very fluent and smooth. Hahaha!
i am in the same group with ying ying, hui mei, cheok, and edmond..
Ya..we kept changing our product..
but fortunately, everything went well.haha!!
I am same group with Lilian,Rong Xiang and Kam Hao.
Our presentation is talking about a printer but we are headache with the point that we going to present because we have no point to elaborate. But lastly we also manage to finish our slide and present it.
About how the result is,i hope we can do all our best and i am sure everyone had try their best.
My presentation is about ink cartridge of printer.
I'm the third person in the group presentation,
but still feel very nervous.
At the end,
I've finished the presentation although my performance was not as good as I predict.
But at least i had tried my best...
our group actually wan to present about hp priter but we change our minds at the last minutes because we can't find the model.And finally we decide to present about canon priter.But fortunately the point are more or least the same so we did't have to rush our peparation.
i am in the same group with Rajagopal,fauzurahman,zulhilmi and zulkifli.My presentation is about laptop.I am the third presenter in my group explain about Random Access Memory(RAM).It very hard to explain about this part because we need to understand what is the function.But i statisfied with my teamwork in process to complete this projek.thank you to my partner....
we are rushing for our project all the time...because we had change our product on the day before we passed up the pamphlate.But it is necessary because we found some problem to describe our initial product...fortunately finally we come out with a proper product,a cook mixer.We still need more information in order to present well.
my group are going to present about the tallest future building that still under construction that is Burj Dubai.All of my group members have done their works completely and we are ready to present our project.our group did not has the model to be exhibit but we had prepared the powerpoint slide show to give some informations to the audiences
i am in the same group with Rajagopal,fauzurahman,zulhilmi and Rohaizamri.My presentation is about processor in laptop.Processor is one of the part in laptop and we need to explain about ability and capability when running in program.My group presenting laptop acer 4920G. Any information about the laptop,you can ask to my group. Let's share and gain the knowledge. All the best to other group such as handphone and Bujr dubai and others.
from this project I feel more confident to stand in front and give my group presentation. My group was present about Burj Dubai. Although we cannot bring the construction model, we still can present using our video of Burj Dubai and with our power point. The benefit we all can get from this final project is we get knowledge about the skyscraper, and also can give motivate to us to achieve our dream to construct a highest tower.
my group presentation is about the main part of laptop which is include processor, RAM, and graphic card. i'm the fourth person that explain about graphic card.. actually i'm feel bit nervous when doing presentation.. but, so far so good.. our final project was finish and i had tried my best..
finih...the presentation was finally over.
to be honest,our group done a good job and present well.although we changed the product in the last minute but still can done it well and have a well prepared.
while the presentation, i feel bit nervous but i stil continue to present it and finally finished it also...i had tried my best during doing this project prohibition.
hai to everyone..
now, we have done with our final project which is we do the exhibition tu promote our product. my group presenting about satelliteand my part is to explain the function of the antenna. with the information that we get, i explain it to the other group to share it. while the presentation, my feeling is still same..a little bit nervous but i've try my best to present our product. anyway, i'm enjoy doing this final project.
hi.... my presentation is about burj dubai... i enjoy doing this project because i can kniw about the highest building in the worl... i hope you will satisfied with our presentation....
Kizuna Satellite.It is a Japenese communication satellite that enables super high-speed data.I really enjoy this group presentation.This is my first presentation that required a model.Congratulations to all groups! Finally we managed to finished our final project.
Chong Hui Mei
AA08169
when we first assignned to this project..we keep changing the product that we wanted to present..fortunately we finally came out with a proper product..however by that time..the presentation was already around the corner..we have to rush here and there to complete the task..at the end of the presentation..we have learnt to manage time properly..duing the presentation..I an quite nervous as I am doing the introduction part..however.. i managed to go through it..and honestly I have learnt a lot from the presentation..
Halo..It's been a while since our last presentation. It was quite a lovable experience I've ever had. To be able to promote our own product and presenting it was quite fun. I am very impressed with all of my classmates that have been hardworking in preparing each other work. There is where teamwork play a vital role in a group. I would like to congratulate to all groups and being with group with, Azzimah, dayah, Azimah and balqish was really a memorable experience. Our final project has been completed and everyone has tried their best. (^_^)
eemmmm
i'm so relieved because my presentation group for technical description was over!!..that was a long time for us to find the information about our product to succeed that project..actually we had decided many suggestion about many types gadget that we had to choose..and lastly we all decided ti choose a satellite as aou product..and we were very satisfied with our good choice..
its to late to comment about our presentation but i will tell you about our presentation...we prepare for the presentation one week before present it..first,we plan what we need to do and devided the work among our members.we do the 3d by autocad that we had learned from our drawing class..i also prepared for the pamplate..its easy because just copy and paste from the drafter that we done before.
That is a chalengge for me. i haven't do this kind of project before. this give me a chance to learn. Initially , our group choose a car amplifier , after we search the information for the amplifier, we unabkle to introduce the product by part. So it is out of our sylybus. Finally, we choose a stand mixer as the presentation product.
about our last project report was about N70's camera phone..
eventhough that was a very stressful week, but we managed to fisished it as best as we can.. but we still felt disappointed about our booth..
we didn't create our booth because a day before that we still confused for what will going to happen the next day.. but overall we enjoyed that day..
ooo.... about the final project our group is not prepare early. But the we all can do the best..only some part we all have not done... but we try do it until our project is done.
try to speak clearly and confident..
do the best for my group member and our group.
so nervous about the presentation & i hope i can do my best so that i can get a high mark..........
BURJ DUBAI............
become the beautiful place in the world...
i want to tell you all about our secret...hehehe
this the last minute prepareration...
but it become the success presentation.....this the high tectnology building in the world..
so it give me motivation to built the world beautiful biliding in the world
hmm...NOKIA N70...
although we have been in a stresful week...
but, alhamdulillah,,,we have already complete our final project well...soooo good...
Our last project report was about N70's camera phone..
Alhamdulillah...we have already complete our final project well...so good...
HELLO EVERYONE... our final project is about nokia N70. we have prepare for report about one we.. and after that we do a presentation. alhamdulillah, we have already finished our final project.. thanks miss ezi, for your support...
well... there's not much... but we satisfied we have done with our project report earlier than the other calassmates... we feel a little proud of ourselves...
Post a Comment